How to Use a Clamp Multimeter

[ad_1]

Clamp multimeter will allow you to measure the electrical voltage and also current without cutting wires or even open the electrical access panel. The clamp multimeter will easily be clamped to a power cord of the device. You can select the right functions and then get the instantaneous readout on the display of your clamp multimeter.

The readout can be either in volts or even amperes, it depends on whether the voltage or even current that will be selected. It will be the valuable tool to troubleshoot the household appliance. When the appliance will not be drawing current throughout the power cord but the voltage is present, it could be the problem with the power supply of the appliance. Here is more information for you.

For the first step, you need to make sure that the appliance or even electrical device will be turned on and it is also plugged into the electrical outlet. If you will suspect, it might not be the voltage present, you can check the circuit breaker in order to make sure that it has not been triggered.

For the second step, you can select the measurement that you need. Most of clamp multimeters have the function knobs that will be turned and others have the function buttons that will be pushed. You should select the voltage or even current. It will be the great idea for you in checking if the voltage is present before you are checking the current as if there will be no voltage present, there will also be no current, a problem is with an outlet or even the circuit breaker.

For the next step, you should choose a type of the voltage or even current that will be measured. Whether you are measuring the voltage or even current, it will be the two selections. You should choose either AC for the alternating current or even DC for the direct current. Household your outlets supply an AC voltage.
After that, clamp the ends of the pincers of the clamp multimeter over your power cord of a appliance or even electrical device.

It is important for you to read the display of the clamp multimeter and the write down your result. It will be the great idea in repeating the measurement and then compare the result in order to make sure that you will get the consistent readings. If the readings are inconsistent, you have to make sure that the pincer arms have clamped tightly on a power cord.

For the last step, unclamp your pincer arms and then turn off your clamp multimeter.


[ad_2]

Source by Harry N Stewart

Comments

Post a Comment

Popular posts from this blog

Black+Decker HHVI320JR02 Dustbuster Cordless Lithium Hand Vacuum, Magic Blue

Image
Price: [price_with_discount] [ad_1] The black+decker HHVI320JR02 Dust buster cordless lithium hand vacuum, magic Blue, is ideal for multipurpose cleaning in your home, garage, auto, boat. The lithium technology provides strong suction and extended run time. It has a washable bowl (20.6Oz) and filter which allows for thorough cleaning between Jobs. The translucent, bagless dirt bowl makes it easy to see dirt and easy to empty. This vac has a rotating nozzle for a comfortable hand position when accessing hard to reach areas, along with an extendable crevice tool that provides access to hard to reach areas and a flip-up brush which allows you to dust and vacuum upholstery. The cyclonic action helps to keep the filter clean and suction strong. 2.0 amp hours. This vac has a lightweight and portable design which makes for convenient cleaning. A wall mount provides a versatile storage solution. Includes: hand vac, Jack plug charger, wall mount, extendable crevice tool, flip-up brush.Lithium
Read more

Your Words Will Be Used Against You In A Lawsuit

[ad_1] The biggest mistake employees make is to talk about their claim when they are in an employment dispute with their employer.  Many employees take a losing stand against their employers because they make statements that undermine their potential claim.  Trevor Keezer, the Home Depot employee who was fired for wearing a “One Nation under God, indivisible” button, illustrates this point.  Keezer began work at the Home Depot in March 2008 as a cashier.  During his employment, he wore a button with an American flag and the phrase “One Nation under God, indivisible.” Keezer says that none of his managers voiced any problem with the button until early October, 2009.  Interestingly, that was around the time that Keezer began bringing a Bible to work to read during his lunch break.  Keezer claims that his button (which he had worn for 19 months) became a problem only after he brought his Bible to work.  Home Depot denies Keezer’s allegations.  Home Depot says that its “dress code policy
Read more

Hydraulic systems for underground utility construction

[ad_1] Now we have developed ourselves into a super race with the help of sophisticated tools. Every discipline requires its own set of specialized tools to achieve the desired progress. When it comes to underground utility construction, we need specialized tools for jobs, such as directional boring, horizontal boring, underground utility construction, trenchless pipe replacement, pipe bursting and electric service installation. While you can find standard machine tools to perform these tasks, some of them require special designs for unique jobs. These machines are powered by a variety of means, which include pneumatic and hydraulic power systems. Especially when working with earth the power required is enormous. This is why powerful hydraulic rod pusher/puller machines are vital for any under ground utility construction. Underground utility constructions are done only by a specific group, who are experts in the field. This is why you can’t find this powerful equipment as easily as a
Read more